Issue |
J Extra Corpor Technol
Volume 30, Number 4, December 1998
|
|
---|---|---|
Page(s) | 190 - 192 | |
DOI | https://doi.org/10.1051/ject/1998304190 | |
Published online | 14 August 2023 |
Original Article
Residual Blood in Neonatal Oxygenators After Drainage
Mater Misericordiae Hospital and Our Lady's Hospital for Sick Children, Crumlin, Dublin, Ireland
* Address correspondence to: Basil Henrick, BSc., ECCP, Mater Misericordiae Hospital, Department of Cardiothoracic Surgery, Eccles Street, Dublin 7, Ireland
The objective of this investigation was to measure the quantity of residual blood remaining in neonatal cardiopulmonary bypass (CPB) circuits after they had been drained and to assess the overall significance with regards to total patient blood volume.
The residual blood volume left in three infant/neonatal CPB circuits-Medtronic Minimax 3381 (Group MM; n=5), Polystan Safe Micro (Group SM; n=6), and Terumo Capiox 308 (Group CX; n=3)-after they had been drained was determined. This was done by using an electronic scale to weigh the circuit before setup and after CPB when all possible blood was recovered from it. Total priming volume, estimated patient blood volume, residual blood volume, surgical blood loss in theater, and autogeneic blood usage were recorded in each case.
Mean residual blood volumes measured were MM=161ml (SD 27ml), SM=103ml (SD 19ml), and CX=133ml (SD 15ml). These volumes were significant, because calculations show that the volume of red cells lost in the circuit is equivalent to fourteen percent of the total patient blood volume.
In view of this, neonatal oxygenator design should be minimized to reduce the priming volume and more consideration should be given to ease of residual blood recovery.
Key words: cardiopulmonary bypass / oxygenator / neonatal / blood / residual
© 1998 AMSECT
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.