Issue |
J Extra Corpor Technol
Volume 37, Number 3, September 2005
|
|
---|---|---|
Page(s) | 303 - 305 | |
DOI | https://doi.org/10.1051/ject/200537303 | |
Published online | 15 September 2005 |
Scientific Article
Cardiopulmonary Bypass Using Argatroban as an Anticoagulant for a 6.0-kg Pediatric Patient
Address correspondence to: Brian Mejak, BS, CCP, Pediatric Perfusion, Doernbecher Children’s Hospital, Oregon Health & Science University, DCH8S, 3181 SW Sam Jackson Park Road, Portland, OR 97006. E-mail mejakb@ohsu.edu
A patient was born with transposition of the great arteries, double-outlet right ventricle, interrupted aortic arch, and a ventricular septal defect and underwent a Damus–Kaye–Stansel procedure with a modified Blalock–Taussig shunt at 14 days old. Three months later, this patient presented with hypoxia and bradycardia was found to have a thrombus present in the main pulmonary artery extending to right pulmonary artery. After initiation of thrombolytic therapy, the patient became severely hypoxic and required the institution of extracorporeal membrane oxygenation. As the result of unknown heparin resistance independent of adequate antithrombin III levels, argatroban therapy was used to achieve desired anticoagulation. The patient was taken to the operating room and converted to conventional cardiopulmonary bypass once adequate activated clotting times were achieved using argatroban. This case report summarizes the use of argatroban as an anticoagulant for a 6.0-kg pediatric patient undergoing cardiopulmonary bypass.
Key words: cardiopulmonary bypass / pediatric / argatroban / thrombosis / anticoagulants
© 2005 AMSECT
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.