EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 40 / No 3 (September 2008) J Extra Corpor Technol, 40 3 (2008) 188-192 References
Free Access
Issue
J Extra Corpor Technol
Volume 40, Number 3, September 2008
Page(s) 188 - 192
DOI https://doi.org/10.1051/ject/200840188
Published online 15 September 2008
  1. Shashoua YR. Effect of indoor climate on the rate and degradation mechanism of plasticized poly (vinyl chloride). Polym Degrad Stabil. 2003;81:29–36. [CrossRef] [Google Scholar]
  2. Burkhart HM, Joyner N, Niles S, et al. Presence of plasticizer di2(ethylhexyl)phthalate in primed extracorporeal circulation circuits. ASAIO J. 2007;53:365–7. [CrossRef] [PubMed] [Google Scholar]
  3. Gourlay T. Biomaterial development for cardiopulmonary bypass. Perfusion. 2001;16:381–90. [CrossRef] [PubMed] [Google Scholar]
  4. Preston TJ, Hodge AB, Riley JB, Leib-Sargal C, Nicol KK. In vitro drug adsorption and plasma free hemoglobin levels associated with hollow fiber oxygenators in the extracorporeal life support (ECLS) circuit. J Extra Corpor Technol. 2007;39:234–7. [Google Scholar]
  5. Bhatt-Mehta V, Annich G. Sedative clearance during extracorporeal membrane oxygenation. Perfusion. 2005;20:309–15. [CrossRef] [PubMed] [Google Scholar]
  6. Urban K, Redford D, Larson DF. Insulin binding to the cardiopulmonary bypass biomaterials. Perfusion. 2007;22:207–10. [CrossRef] [PubMed] [Google Scholar]
  7. Uretzky G, Landsburg G, Cohn D, Wax Y, Borman JB. Analysis of microembolic particles originating in extracorporeal circuits. Perfusion. 1987;2:9–17. [CrossRef] [Google Scholar]
  8. Peek GJ, Thompson A, Killer HM, Firmin RK. Spallation performance of extracorporeal membrane oxygenation tubing. Perfusion. 2000;15:457–66. [CrossRef] [PubMed] [Google Scholar]
  9. Kurusz M, Christman EW, Williams EH, Tyers GF. Roller pump induced tubing wear: Another argument in favor of arterial line filtration. J Extra Corpor Technol. 1980;12:49–59. [Google Scholar]
  10. Kurusz M, Williams DR. Blood surfaces in the extra corporeal circuit: a scanning electron microscopic study, 1975. J Extra Corpor Technol. 2004;36:78–90. [Google Scholar]
  11. Kim SC, Yoon HJ, Lee JW, Yu J, Park E, Chi S. Investigation of the release behavior of DEHP from infusion sets by paclitaxel-loaded polymeric micelles. Int J Pharm. 2005;293:303–10. [CrossRef] [Google Scholar]
  12. Stonerock B, Grady K, Riley J, Spiwak A. Roller pump fatigue in coated vs. non-coated tubing. J Extra Corpor Technol. 2006;38:99. [Google Scholar]
  13. Marshall L. Filtration in cardiopulmonary bypass: past, present and future. Perfusion. 1988;3:135–47. [CrossRef] [Google Scholar]
  14. Snyder EJ, McElwee DL, Harb HM, et al. Investigation of fatigue failure of S-65-HL “super tygon” roller pump tubing. J Extra Corpor Technol. 1996;28:79–87. [CrossRef] [EDP Sciences] [PubMed] [Google Scholar]
  15. Kemna GD, Docherty JP. Why filter the cardiopulmonary circuit pre-bypass? J Extra Corpor Technol. 1979;11:119–30. [Google Scholar]
  16. Subramanian P, Ainsworth P, Cassey J, Phelan D. Lost bits: Particle shedding with polyvinyl chloride intravenous administration sets. Pediatr Surg Int. 2002;18:658–61. [CrossRef] [PubMed] [Google Scholar]
  17. Brooks JD, Beauchamp RA, Magrath RA, Clark RE. Efficacy of particulate removal by a pre-bypass filter with different oxygenation systems. J Extra Corpor Technol. 1979;11:175–82. [Google Scholar]
  18. Rossi M, Schettler T. PVC & Healthcare. Setting Healthcare’s Environmental Agenda. 10 16, 2000 San Francisco, CA. [Google Scholar]
  19. Lakshmi S, Jayakrishnan A. Migration resistant, blood-compatible plasticized polyvinyl chloride for medical and related applications. Artif Organs. 1998;22:222–9. [CrossRef] [PubMed] [Google Scholar]
  20. Koch HM, Bolt HM, Preuss R, Eckstein R, Weisbach V, Angerer J. Intravenous exposure to di(2-ethylhexyl)phthalate (DEHP): metabolites of DEHP in urine after a voluntary platelet donation. Arch Toxicol. 2005;79:689–93. [CrossRef] [PubMed] [Google Scholar]
  21. Hanawa T, Marumatsu E, Asakawa K, et al. Investigation of the release behavior of diethylhexyl phthalate from the polyvinyl-chloride tubing for intravenous administration. Int J Pharm. 2000;210:109–15. [CrossRef] [Google Scholar]
  22. Hanawa T, Naoko E, Masahiko S, et al. Release behavior of diethylhexyl phthalate from the polyvinyl-chloride tubing used for intravenous administration and the plasticized PVC membrane. Int J Pharm. 2005;297:30–7. [CrossRef] [Google Scholar]
  23. Rusu M, Ursu M, Rusu D. Poly(vinyl chloride) and poly(ε-caprolactone) blends for medical use. J Thermoplastic Composite Mater. 2006;19:173–89. [CrossRef] [Google Scholar]
  24. McGovern JG, Garvin CP, Jones DS, Woolfson AD, Gorman SP. Modification of biomaterial surface characteristics by body fluids in vitro. Int J Pharm. 1997;149:251–4. [CrossRef] [Google Scholar]
  25. Ogunniyi DS. Castor oil: A vital industrial raw material. Bioresour Technol. 2006;97:1086–91. [CrossRef] [Google Scholar]
  26. Jones FJ, Weinberger CB. Screening effects when sampling suspensions in laminar flow through pores. AlChE J. 1997;43:2405–14. [CrossRef] [Google Scholar]
  27. Jeong JH, Sugii Y, Minamiyama M, Okamoto K. Measurement of RBC deformation and velocity in capillaries in vivo. Microvasc Res. 2006;71:212–7. [CrossRef] [Google Scholar]
  28. Pastoriza-Pinol JV, McMillan J, Smith BF, et al. An analysis of micro embolic particles originating in the extra-corporeal circuit before bypass. J Extra Corpor Technol. 1979;11:221–8. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.